The Kenwood TR-9000 2 meter multimode transceiver provides 2 meter operation in FM, LSB, USB and CW modes. Power output may be selected at 1 watt (FM/CW) or 10 watts (FM/SSB/CW). Frequency coverage is 143.9-148.9999 MHz. Enhancements include: RF gain, RIT, S/RF meter, all-mode squelch and 5 memories. Both memory scan and band scan are supported. Requires 13.8VDC at 2.9 Amps. 6.8 x 2.7 x 9.6 inches 5.5 lbs
- 6 Memories
- Noise Blanker
- Memory Scan
- Hi/Low RF Power Control
- Dual Digital VFOs
- Frequency Lock
- CW Side Tone
incl ctcss decoder dyo kit
compleet met mike en 12v kabel en beugel
Zeer nette Kenwood TS-50
met evt een digibox ( voor digimodes via pc of laptop).
160 m ~ 10 m transceiver amateur operation
500 kHz ~ 30 MHz general coverage receiver
DDS with "fuzzy logic" control
100 memory channels
All modes -- LSB, USB, CW, AM and FM -- are built-in.
kan hier getest worden. verzenden op eigen risico.
prijs is excl. digimode interface.
Yaesu FT- 890 HF Tranciever.
met Yaesu MD-1 ( zonder handmike evt los te bestellen).
- 160-10 meters
- Electronic Keyer
- If Notch
- IF Shift
- Dual VFOs
- Noise Blanker
- 100 Watts Output
- Break-in CW
- Speech Compressor
- Electronic Keyer
The Yaesu FT-890 is an advanced and affordable HF transceiver covering 160 to 10 meters. The general coverage receiver tunes from 100 kHz to 30 MHz. Power output is 100 watts in CW, SSB, FM and 25 watts AM. The FT-890 features IF Shift, IF Notch and 16-bit main CPU. The FT-890 requires 13.8 VDC at 20 Amps. 238x93x243mm 5.6 kg.
The Yaesu FT-890AT includes the internal ATU-2 automatic antenna tuner.
incl. voedingskabel en doos en orginele handleiding.
Radio is gebruikt, maar werkt nog perfect. testen kan hier bij afhalen.
Heil pro-set 6 Elite,
Als nieuw, door inruil verkregen (niet geschikt voor icom).
nieuwprijs € 190,-
The new Heil Pro Set Elite is the ultimate boomset designed for amateur radio operators and uses the Heil HC-6 wide response microphone element. The HC-6 is designed for full range audio or can be adjusted (with radio adjustment) for bright, articulate audio to cut through amateur radio noise and signal pileups. The Pro Set Elite offers dual side, highly efficient speakers mounted in acoustically tuned chambers which offer high rejection of outside noise. The exclusive Heil Phase Reversal feature allows the user to move the signal acoustically, which creates a spatial widening of the sound field that makes it easier to ‘see’ a signal inside a pileup while removing listener fatigue during prolonged use. The headphone’s speakers fold up for easy storage.
The field-replaceable cushioned ear pads also come with removable cotton covers that can be easily removed for washing. The 6′ coiled cable terminates in a 1/8″ mono plug for the microphone, and a stereo 1/8″ plug for headphone speaker connection. An 1/8″ to 1/4″ adapter is also supplied. The Pro Set Elite works with all Heil AD-1 adapter cables, which mate with just about every type of amateur radio transceiver. To find out which AD-1 adapter will work with your radio please consult the Heil Sound Adapter Selector.
There are two different models:
Pro Set Elite – 6 contains the Heil HC-6 full range dynamic microphone element. Its -3dB points are fixed at 100 Hz and 12.5 kHz, with a sensitivity of -57 dB at 600 ohms output impedance (centered at 1kHz). The HC-6 response can be equalized to match just about any requirement, from full range rag chew to serious contesting and DXing.
Note: To use dynamic mic elements on vintage radios (requiring a high impedance input of 10k to 30k ohms) will require the use of an XT-1 impedance matching transformer.
Heil handswitch ( ptt switch.
gebruikt, als nieuw.
door inruil verkregen
The Heil HS-2 Handswitch was designed to ergonomically fit your hand naturally and comfortably for long communications with no fatigue. Activating it is just like a pistol trigger with the index finger. The ergonomic design features a very light touch trigger switch that is a reliable 15 amp microswitch. Interfacing with your equipment through a 6 foot cable terminating in a metal 1/4″ mono plug.